The room thermostat TAM, designed simply and elegant, combines simplicity of operation and use with ease of installation.

The industrial room thermostat TA is suitable for temperature control in industrial rooms such as greenhouses, industrial buildings, warehouses etc.

The frost protection thermostat serie TD is suitable for the protection of hot-water heating registers, downstream air heaters in ventilation and climate control systems as well as heat exchangers in cooling systems. The thermostats can also be used to control electrical heating systems and to switch acoustic or optical alarm signals and measure temperature in non aggressive gases or liquid medium.

The electromechnical capillary thermostat TK, three available ranges, is suitable for most of temperature control requirements for heating and cooling applications. The thermostats are available with external, internal range knob and with fix temperature calibration.

The electromechnical immersion thermostat TI, three available ranges, is suitable for most of temperature control requirements for heating and cooling applications. The thermostats are available with external, internal range knob and with fix temperature calibration.

The electromechanical strap-on pipe thermostat TC with liquid expansion sensor, two available ranges, is suitable for most of temperature control requirements for heating and cooling applications. The thermostats are available with external, internal range knob and as safety limiter. The thermostat comes with a spring band and a 20 g bag of thermal paste.

The RTA02 controller is designed to control fan coil in heating and cooling systems. RTA02 controls heating and/or cooling valves, fan speeds with 2 or 4-pipe fan coil.

• Applications for 2/4-pipe fan coils, configurable
• Fan control with manual setting of three speeds
• Control action for actuators: ON-OFF
• Analog input for water temperature sensor
• Output control voltage: valve actuators 230 V AC, fan 230 V AC
• Power supply: 230 V AC, 50/60 Hz
• Frost protection function
• Display with blue backlight
• CE certification

The RTA37 thermostat, in its various versions, is suitable for application in heating, air conditioning and refrigeration systems. The RTA37 can be configured with the following temperature ranges:

• +5...+35°C
• -10...+20°C
• -35...+5°C
• +35...+65°C

The choice of temperature range must be made at startup by acting on the dip switches. Then place the label, with the chosen temperature scale, on the front of the housing.

Il termostato RTA37, nelle varie versioni, è adatto per applicazione negli impianti di riscaldamento, condizionamento e refrigerazione. Il RTA37 può essere configurato con i seguenti campi di temperatura:

• +5...+35°C
• -10...+20°C
• -35...+5°C
• +35...+65°C

La scelta del campo di temperatura deve essere effettuata all'avviamento agendo sui dip switches. Quindi posizionare l'etichetta, con la scala di temperatura scelta, sulla parte frontale della custodia.

The flow switch serie FLUS is designed for controlling flow rates in pipes and ducts employed in HVAC applications from 1" up to 2". The reed contact guarantees a complete isolation between the electrical and the mechanical part.

Il flussostato per liquidi serie FL è progettato per l'impiego in condutture e tubi in applicazioni HVAC da 3/8" fino a 2". In particolare per il monitoraggio del flusso di liquidi, per pompe di circolazione dell'olio, circuiti di raffreddamento o lubrificazione, scambiatori di calore, compressori ed è utilizzato come dispositivo di controllo del flusso o come interruttore di protezione per mancanza acqua.

Il flussostato per liquidi FL200 è progettato per l'impiego in condutture e tubi in applicazioni HVAC da DN32 fino a DN200. In particolare per il monitoraggio del flusso di liquidi, per pompe di circolazione dell'olio, circuiti di raffreddamento o lubrificazione, scambiatori di calore, compressori ed è utilizzato come dispositivo di controllo del flusso o come interruttore di protezione per mancanza acqua.